MSI 865PE Neo3-F Instrukcja Użytkownika Pobierz pdf (Strona 7)

iPoint NVR v5.16 Server Manual

Relay (on/off): Controls the PTZ cameras internal relay (relay1), or the decoders relay (relay1)

Used to turn on a light or control an access gate.

Wiper (on/off): Using the PTZ cameras corresponding wiper control relay, this toggles the

relay/wiper on and off

Zoom +, Zoom- : Controls the zoom function of the PTZ camera.

Focus +, Focus-: Overrides the auto-focus setting of the PTZ camera, adjusts focus of the image.

Iris+, Iris- : Overrides the PTZ cameras auto-iris and brightens or darkens the image.

Setup: Set the speed by moving speed domes to desired place. Input the address in address

space (take 3 as an example here). Finally press the SET button and the pointer will be bright for 3

seconds while programming. Set others in the same way.

Delete Preset: Click “-” button, select preset number from numeric panel, then click the SET

button.

Preset: If preset number is less than16, click its number button in PRESET ZONE. If preset

number is more than 17, call out by clicking number button then click GO.

Auto tracking along with all preset.

Start tracking: In numeric panel, click the “-, + number” (this number is the interval of every

preset), then click GO.

Stop Tracking: In preset zone, click any preset number, then click GO.

NOTE: You can also control the PTZ image from the Main Screen of the NVR Software.

Figure1-2-3

Shown in image #3, each rectangle is the effective action. Arrows denote the direction of the action.

Press and hold down the mouse in a corresponding area, this will control the PTZ.

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Brak uwag

MSI 865PE Neo3-F Instrukcja Użytkownika Strona 7